Pervious Concrete

Frequently Asked Questions

pervious concrete | why use it? | properties | installation | testing | success stories | faqs

Q: What about drainage issues in soils with high clay content?

A: Typically, if a soil type has sufficient percolation to support a septic tank system, it will be suitable for pervious concrete. If a soil is truly impervious, the pervious concrete system can still be useful for detention pond requirements.Soil percolation rates are most important if you must meet stormwater quality requirements. A typical parking lot design may have 5”– 8” of pervious pavement on top of a 6”–12” subbase of #57 stone (40% voids) on a geotextile fabric. In sandy areas, pervious is placed directly above the sand.

Q: What about clogging?

A: Clogging problems are mainly an issue of design. If a natural area with grass or exposed soil is allowed to drain stormwater across a pervious concretepavement, fine material can be introduced into the system, causing localized clogging. Vegetative matter can collect on the surface of the pervious concrete causing some clogging, but routine sweeping or vacuuming will restore porosity. Studies have been conducted that indicate pressure washing will restore the porosity of clogged pervious concrete to nearly new conditions.

Q: What about freeze-thaw issues?

A: Pervious concrete has been placed in freeze-thaw climates for over 15 years. Successful applications of pervious concrete in freeze-thaw environments have two common design features—the cement paste is air-entrained, and the pervious concrete is placed on 6–12 inches of drainable aggregate base (¾” or larger clean gravel).

Q: What are some other uses for perviousconcrete?

A: Pervious concrete has been successfully used for low-volume streets, driveways, sidewalks, golf cart paths, retaining walls, slope protection, and French drains. It can also be utilized for a variety of paving projects.